General News Blog


What things everyone should know about Floor self-leveling?

Floor self-leveling is a technique that helps you to level your floor by applying the right amount of pressure in case of unevenness. The process involves the use of a hydraulic cylinder and can be used to set up a variety of surfaces including concrete, wood, stone, and more. It’s an easy way to compensate for unevenness without having to install any formwork or special tools. The process is also faster than traditional methods like jackscrews because it only requires one person to operate it.

The first step in this process is to make sure that your surface is level by using a spirit level or other similar tool to check for any major inconsistencies. Once you find out where the problem lies, you can use the hydraulic cylinder to apply pressure to level out any irregularities left behind from previous floors.

You should then move on to setting up your new flooring with plywood or OSB cutouts on top of it so that it can be placed on top without damaging anything below it. Next up, you need to use tape measures and chalk marks on both sides of each piece of plywood or OSB so that they match up perfectly once everything is finished.

Get to know about the process of floor self-flooring!

Floor self-leveling is the process of adjusting the level of the floor using a portable device. The process consists of several steps, each of which is used to detect and correct variations in the surface. The first step is called “trial”, during which a small point on the floor is marked. This point represents one unit (one square foot) of area. The second step is called “pointing”, which involves moving a sensor from Point A to Point B on the line connecting them. This line represents a reference axis for measuring changes in surface height. The third step is called “storing” and it involves storing data about points A and B in memory so that they can be used again later on.

Do you know about floor self-flooring machines?

The floor self-leveling machines are a new type of machine that can be used to level the floor. This type of machine consists of an elevator that moves up and down, and a control system that controls the movement of the elevator. It has many advantages over other types of machines, such as the fact that it automatically adjusts to uneven surfaces, which makes it suitable for use in all kinds of construction projects. 

The principle behind this machine is very simple: the elevator moves up and down according to the height difference between its bottom surface and its top surface (usually 20-30mm). The distance between these two surfaces is measured and compared with a preset value. If there is a difference, then the elevator will move up or down accordingly so that it can be leveled. As soon as an object touches one side or another, it will change its position again until it reaches its predetermined position again.